Gas flare maintenance: what operators should know
Gas flares often only run when needed – during overhauls, faults in CHP units or gas upgrading, or with surplus gas. That is exactly when they must ignite reliably. Regular maintenance is therefore not optional but a prerequisite for safe and permit-compliant operation.
What maintenance includes
- Visual and functional inspection of the entire flare and gas train
- Inspection of ignition device, ignition electrode and pilot gas train
- Functional test of flame monitoring and safety shut-off valves
- Check of pressure switches and gas filters
- Check of control system, messages and operating log
- Maintenance report for your documentation
What operators can do themselves
Regular visual checks, keeping the operating log and watching messages belong in the hands of trained operating staff. Our operator instruction teaches exactly this knowledge – at our works or on site.
What the regulations say
For biogas plants in Germany, TRAS 120 and TA Luft mainly require that the flare starts automatically before the pressure relief device releases gas, that its operating times are recorded and that maintenance and inspections are documented in the operating log. In addition, there are periodic leak tests and expert inspections. The specific requirements differ by federal state or country – your permit is always decisive.
Practical tip
Because the flare often does not run for weeks, we recommend at least annual maintenance with a functional test of ignition, flame monitoring and safety shut-off valves – plus regular test runs by the operating staff.
Maintenance does not replace inspection obligations
Important: maintenance does not replace the legally required periodic inspections, e.g. under the German Industrial Safety Regulation, or official acceptance tests. Responsibility for safe operation remains with the operator.
Plannable with a maintenance contract
With a Wartungsvertrag appointments are scheduled automatically, response times are fixed and you receive discounts on spare parts – for C-nox flares and plants from other manufacturers.
Stuck?
A CONTEC service technician will call you back – for all manufacturers, even without a maintenance contract.
Book telephone supportLet us find your spare partView maintenance contracts →



Leave a Reply
Want to join the discussion?Feel free to contribute!